|
- Trim pieces
- Instrument Bezels
- Nacelle
Accents
- Bridge the gap Heat Shield
- Show chrome luxurious covers
- Fills the ugly gaps, cleans up
engine area
- No drilling or modifications necessary
- See Finisher Starter Cover
- Switch covers
- Easy installation
- Fits
Electra Glides, Road Glides, Street Glides and Road Kings
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Headlight Visor for 7 inch Headlight |
|
|
|
Deep dish bezel for 3-1/4" flat turn signals |
|
|
|
Radio Accents for '06 and later |
|
|
|
Road Glide Nacelle Accents |
|
|
|
Road Glide Premium Instrument Surround |
|
|
|
Bridge the gap heat shield |
|
|
|
Behind the Engine Filler Panel Frame Cover |
|
|
|
Oil Line Cover and Transmission Shroud |
|
|
|
Oil Line Cover and Transmission Shroud |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transmission Shroud Set (stock head pipes) |
|
|
|
Transmission Shroud Set (true dual pipes) |
|
|
|
|
|
|
|
Front Transmission Shroud |
|
|
|
Mid-Frame Cover, Model Years '97 - '07 |
|
|
|
Mid-Frame Cover, Model Year '08 |
|
|
|
Road King Dash Panel Insert |
|
|
|
Start Cover for MY '99 - '06 |
|
|
|
Start Cover for MY '07 - Current |
|
|
|
|
|
|
|
Lower Leg Accents MY '00 - '07
|
|
|
|
Lower Leg Accents MY '08 without ABS
|
|
|
|
Lower Leg Deflector Shields
|
|
|
|
Lower Leg Deflector Shields, gloss black
|
|
|
|
Stereo Accent, MY '96 to current |
|
|
|
Switch
Covers for '96 and later Electra Glide, chrome |
|
|
|
Switch Covers for '96 and later Electra Glide, polished stainless
steel
|
|
|
|
Switch Covers for '96 and later Electra Glide, chromed plastic |
|
|
|
Switch Covers for '00 and later Road Glide, polished stainless
steel
|
|
|
|
Switch Covers for '99 and earlier Road Glide, polished stainless
steel
|
|
|
|
Large Guage Bezels (pair) |
|
|
|
Small Guage Bezels (pair) |
|
|
|
Chrome Billet Indicator Light Bezel for 96 and up Electra Glide |
|
|
|
Front Chrome Speaker Trim |
|
|
|
|
|
|
|
|
|
|
|
Hollow Point Sleeve & Hot Spot Kit (10 pack) |
|
|
|
Neutral Switch and Boot Cover |
|
|
|
Turn Signal Bar Filler Panel, for '10 FLHX & FLTRX |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clutch Cable Adjuster Cover |
|
7235: Rocker Switch Covers. Quick installation...no disassembly
required. Brushed stainless. Fits: '07-'13 FLHTCUSE, '11 FLTRUSE, '12-'13 FLTRXSE
7234:
Rocker Switch Covers. Quick installation...no disassembly required. Brushed stainless. Fits: '96-'09 FLHT, '96-'13
FLHTC, '04-'05 FLHTCSE
7233: Rocker Switch Covers. Quick installation...no disassembly required.
Brushed stainless. Fits: '06-'13 FLHX, '10-'12 FLHXSE, '10-'11 FLHXXX, '10-'13 FLTRX
7232: Rocker
Switch Covers. Quick installation...no disassembly required. Brushed stainless. Fits: '96-'13 FLHTCU, '10-'13 FLHTK,
'06 FLHTCUSE, '98-'09 FLTR, '11-'13 FLTRU, '00-'01 & '09 FLTRSE, '09-'13 FLHTCUTG
7267: Is your inner fairing
dull or sun-faded in this area? Here's an instant fix to make this area even better than new! Peel-&-Stick! Fits: ’96-’12
Electra Glides & ’09-’12 FLHTCUTG Tri Glide Ultra Classics. Or mount it on your Street Glide for another
way to cover up the holes from when you remove the mirrors and mount our windshield mounted mirrors. 2182: Headlight Visor
for 7" Headlight. Long, lean, & mean! That’s the illusion your stock headlight shell will get by adding this
slick Headlight Visor. Features a nicely finished rolled front edge with center bullet - a big difference that will be noticed
immediately. Fastens securely to your existing headlight for easy installation! Fits: All H-D Models with
7" headlight (except Dyna). (Note: Does not fit with H-D Accessory Trim Rings.)
7790: Add depth & style to your stock flat pancake style turn
signals. These new Deep Dish Bezels are just the ticket to add a whole new look to the front or rear of your motorcycle. Simple
to install, simply mounts over your existing turn signal lenses & features a design that allows for the existing edge
of the lens to glow when illuminated. Fits: ’86-’10 Electra Glides, Road Glides, Tour Glides, Road Kings, &
Heritages equipped with 3-1/4” Flat Turn Signals.
3780:
Forget about run-of-the-mill gauge bezels… this kit
totally transforms the appearance of the Road Glide speedometer, tach, and fork nacelle. The main cover envelops the gauges
and indicator lights with an elegantly sculpted shroud while the four individual accent pieces decorate the edges of the nacelle.
Simple peel-and-stick installation for an instant transformation!
HF-LTISC2: Premium combination
Instrument Surround and Switch Cover for all Road Glides was created from customer feedback. You liked the original chrome
surround, but wanted the chrome to adorn the switch area as well. The HF-LTISC2 is a beautiful easy to install work of
art to house your tachometer and speedometer. Easy 10 minute installation for instant gratification.
9196: Take the “blues” away with this perfectly designed
heat shield. Quickly and easily installed, this piece integrates seamlessly and bridges the ugly gap left between the stock
heat shields. Take a good look at your bike and you won’t know how you were able to live without this part. Fits: ’93 to '08 Dresser and Road King models with stock front head pipes and heat shields.
7857: This larges show chromed cover fits
that nasty "black hole" behind your rear cylinder and starter while perfectly hiding the gap between the y-frame
member. No drilling or modifications necessary for cruise control equipped models. If you have LED's lighting
your engine, this helps reflect light and makes that area sparkel. Fits '97 to '07 Electra Glides, Street Glides,
Road Glides and Road Kings. Reminds us of a similar product in the Electra Glides' heritage when a similar
cover was offered as an accessory to Electra Glides from the 60's and 70's. Nice upgrade item!
8201:
Oil Line Cover and Transmission Shroud. No custom twin cam will ever be complete without this beautiful cover.
After this easy installation, the rough cast area around the transmission and oil lines disappears under a layer of luscious
chrome. Fits '02 to '06 Electra Glides, Road Glides, Street Glides and Road Kings.
8209: Same as above for model years '99
to '01.
8264: This
Oil Filler Spout Cover really cleans up that dull, drab area around your oil filler neck. Chrome plated die-cast
construction installs easily on '93 to '06 Electra Glide, Road Glides, Street Glides and Road Kings. (Compatible
with H-D Engine-Transmission Interface Covers 66503-00, 66503-02, 66096-02)
8274: This Rear Cylinder Base Cover elegantly
conceals the area between the transmission top cover and the rear cylinder. Install by itself or as the perfect
compliment to our Oil Line Cover & Transmission Shroud. Fits '02 to '06 Electra Glides, Road Glides, Steet Glides
and Road Kings. (Can be used with other H-D covers with minor modifications.)
8394: This inexpensive, chrome plated cover cleans
up the “black hole” behind the rear cylinder on your Twin Cam engine. Use it with our Transmission Shroud for
an amazing upgrade. Fits MY '07 and '08 Touring models. Note: Requires
Küryakyn Front Transmission Shroud for Installation P/N 7874.
8397:
This cover was born to be part of your '07-'08 Touring Model. The smooth lines of this piece fits perfectly
with the existing stock engine case and primary housing. Try it together with the Cylinder Base Cover to transform the
left side of your bike. Add one or both to create a smooth sleek look. Fits Road Kings, Electra Glides,
Road Glides and Street Glide.
7876, 7877,
7875, 7874: Transform the right side of your awesome Twin Cam engine with these easy to install, luxurious transmission
shroud covers. Sold individually or as a set for bikes equipped with aftermarket True Dual pipes. Fits MY '07-'08.
7842, 8239 Mid-Frame
Covers: Create a smoother, creamier look by concealing unsightly frame welds with this luscious, chrome-plated steel
cover. Installs easily in just a matter of minutes.
1520
Dash Panel Insert: This sculpted, die-cast chrome dash panel insert is a huge improvement over the generic, rough
cast finish dash Road Kings come with. Beveled openings for indicator lights and the ignition switch evoke a recessed “frenched
in” look. Using only two fasteners, you can make the leap from ho-hum to WOW in minutes!Fits:
All '94-'07 Road King models (ex. '04-'07 FLHRS & '07 FLHRSE)
Note: Not compatible with LCD/L.E.D. Speedometer, P/N
390. 7846:
Here’s one of the nicest details for Touring Models we’ve developed yet. This one simple cover turns the hodge-podge
of the starter solenoid and all of its related wiring into one sculpted, glistening unit. It’s designed to work with
the stock starter end cover and complement our Transmission Shroud and Cylinder Base Cover. Now this once dull, unattractive
part of your bike will sparkle in sunlight or accent lighting, and be easier to keep clean too! Fit MY '99 - '06. 7847:
Same as above for MY '07 to Current (ex. Screaming Eagle models). 8635: You’d be amazed at the amount of time, materials
& labor required to simply replace the stock stainless fork slider covers with chrome ones. Our new Upper Fork Slider
Covers provide the same shimmering chrome finish, but install in only minutes over the stock covers-no need to disassemble
the front end! Want to really look sharp? Use these along with our Chrome Lower Leg Covers (P/N 8630 or 8631). Fits ’96-’08
FLHT, FLHTC, FLHTCU, FLHX (Does not fit Screamin’ Eagle Models 8630: One of the most notable features of the big H-D touring
rig is the big burley front end. What a shame that the lower legs and brake calipers come from the factory with polishing
imperfections, and such an uninspiring dull finish! This innovative new kit provides an easy, low cost way to put a flawless
chrome finish on the lower legs (from the fender mounting bosses down) AND the brake calipers with no need to dismantle the
front end! Constructed of beautifully chromed stamped steel for a long and beautiful life. Fits '00-'07
Touring Models (Dressers, Road Kings, Road Glide, Street Glide) 8631:
Similar to above. Fits: '08 Touring Models without ABS (Dressers, Road Kings, Road Glide, Street Glide)
Note: This set does not include caliper covers
7768: Protect those legs
& keep them looking good! Introducing the Lower Leg Deflector Shields. These great looking chrome accents not only look
good but also protect your factory lower fork legs from the notorious “sand blasting” caused by road debris. Installation
is effortless with no tools required. Fits: ’00 - current Electra Glides, Road Glides, Street Glides, Road Kings
& Trikes. 7209: Similar to above
but glossy black with fender boss covers for ’00-’11 Electra Glides, Road Glides, Street Glides, Road Kings &
Trikes.
3781 and 3782: These elegant
Gauge Bezels blend beautiful chrome rings with tasteful, colored accents.The rubber-like accent is captured by the press-on
chrome ring. Each pair of bezels includes black, red, & blue accents giving the rider options at the time of installation
to select the color that best complements their motorcycle's paint
scheme. Large Deluxe Gauge Bezels with Colored Accents (pr) Fits: '00-'09 Electra Glide, Road Glide
& Street Glide speedometers & tachometers. Small Deluxe Gauge Bezels with Colored Accents (pr) Fits: '86-'09
Electra Glide, Road Glide & Street Glide volt meter, oil pressure, air temp, & fuel gauges. 3765: Get the over the top look without
the over the top price with the Chrome Stereo Accent. Made from lightweight ABS, this great looking chrome accent is just
enough to set your bike in a class all its own. Installation is a snap with no tools or dis-assembly required. Fits '96 to
current. SW-3783:
This trim places an attractive chrome frame around the ignition & the adjacent control
switches. Smooth chrome surface is much easier to keep clean than the stock matte finish. Simple peel-&-stick installation
requires no tools or disassembly. SW-001/002/003:
Switch Accents for Street/Ultra/Electra
Glide and Road Glide. Polished stainless steel, will not rust, pit,
chip or discolor for that custom chrome look. SW-001P: Switch Accents for
Street/Ultra/Electra Glide. Chromed plastic. ST-604: Chrome Front Speaker Trim. Accented by a horizontal center
bar with a Bar & Shield logo, this chrome-plated trim makes your speakers look as good as they sound. Convenient adhesive
backing allows you to install the trim easily without removing the outer fairing. Made from lightweight ABS material. Fits
'96-later Electra Glide® (including FLHTCUTG) and Street Glide® models. ST-584: Chrome Rear
Speaker Trim. When it comes to styling, chrome always sounds great, especially when it's added to your rear speakers. These
chrome-plated, steel trim bezels mount directly over the Original Equipment rear speaker grills, adding a subtle spot of chrome.
Easy-to-install, the kit includes chrome-plated mounting hardware. Fits '98-later FLHTCUI and '09 FLHTCUTG models.
HD-62:
Chrome Billet Indicator Light Bezel for '96 and Up Electra Glide. 8666: If your bike wasn't noticed before, it sure will be now! This classy chrome Tour-Pak
trim applies right over the stock black Tour Pak light bar. Besides the striking chrome finish that looks incredible with
any paint scheme, the smoked lenses appear to be chrome, but illuminate red when the lights are activated. Also, the chrome
center panel can be left chromed, painted to match the bike's color, or removed completely allowing the stock Harley Davidson
script to be proudly framed. Special purchase item. Fits: '93-'09 Ultra Classic Electra Glides & '93-'96 Ultra
Classic Tour Glides. See companion
part: LLT-650
7771:
Give your motor the ultimate finishing touch! Works great on all motor bolts using a ¼” Socket Head Cap Screw.
Available in packs of ten - two packs will cover both sides of your motor. 2025: Neutral switch cover. Conceal both the switch body & the stockrubber insulators!
Installation is a breeze. Fits '98 to current touring. 3156:
Cover those ugly exposed wires the professional way with this Turn Signal Bar Filler Panel. Not only does this filler panel
hide the unappealing wires of your rear light bar, it also gives a finished chrome look that your friends will envy. Installation
is hassle free with no tools required. Fits model year 2010 Street Glides and Road Glide Customs. 7746: Undemanding & understated. Its thin profile allows
for a perfect highlighted contour without being too much. The chromeplated ABS couldn’t be simpler to install –
Just peel-&-stick! Fits: ’96-’11 Electra glides, street glides & Trikes. 1291: Front caliper cover. These unique accents cover the entire profile
of the brake caliper while deviating from the standard round style caliper insert. Fits: All '84-'99 Models and '00-'07 FLSTS/
FLSTSC/FXSTS, '08-'11 FLSTSB Cross Bone. 1293: Rear caliper cover. These unique accents cover the entire profile of the brake
caliper while deviating from the standard round style caliper insert. Fits: All '87-'99 Models (except Dressers or Road Kings). 7259: Dress up your cable with some chrome! Replaces
the stock rubber “bellow” boot with a stunning two-piece design. This durable chrome plated steel piece telescopes
to adjust to the length of the adjuster, so it’s more compact. The best part is, it doesn't require any clips or fasteners
to hold it in place! Fits: ’87-UP H-D Models w/Stock Clutch Cables & Most Braided Cables with .355" or Less
Diameter (ea)
|
| 8239 Mid-Frame Cover |
|
| 8239 on bike |
|
| 7842 Mid-Frame Cover |
|
| 7842 on bike |
|
| 1520 Dash Panel Insert for Road King |
|
| 1520 Mounted on Bike |
|
| SW-001 Switch Covers |
|
| 7771 Hollow Point Sleeve & Hot Spot Kit |
|
| 7771 Shown on one side of bike |
|
| 7259 Clutch Cable Adjuster Cover |
|
| 7259 Clutch Cable Adjuster Cover |
|
 |
|
Photos:
|
| 7235 Rocker Switch Covers |
|
| 7232 Rocker Switch Covers |
|
| 7234 Rocker Switch Covers |
|
| 7233 Rocker Switch Covers |
|
| 7267 Inner Fairing Covers |
|
| 7267 Inner Fairing Covers |
|
| 2182 Headlight Visor for 7" Headlight |
|
| 2182 Headlight Visor for 7 |
|
| 7790 Deep Dish Bezels for Flat Turn Signals |
|
| 7790 Deep Dish Bezels for Flat Turn Signals |
|
| 3765 Stereo Accent |
|
| 3765 Stereo Accent |
|
| SW-3783 Chrome Switch Covers |
|
| SW-3783 Chrome Switch Covers |
|
| RAD-001, SW-001 Polished Stainless Radio Accents & Switch Covers |
|
| SW001P chromed plastic switch covers |
|
| SW001P chromed plastic switch covers |
|
| 3780 Road Glide Nacelle Accents |
|
| 3780 Kit |
|
| HF-LTISC2 Road Glide Instrument Surround |
|
| HF-LTISC2 Road Glide Instrument Surround |
|
| HF-LTISC2 Road Glide Instrument Surround |
|
| 9196 after installed on Bike |
|
| Before 9196 is installed |
|
| 9196 Heat Shield |
|
| 7857 on Bike |
|
| 7857 |
|
| Oil Line Cover and Transmission Shroud |
|
| 8201 |
|
| 8209 |
|
| 8264 on Bike |
|
| 8264 |
|
| Rear Cyclinder Base Cover |
|
| 8394 |
|
| 8274 |
|
| 8397 on Bike |
|
| 8397 |
|
| 7876 Transmission Shroud |
|
| 7876 or 7877 |
|
| 7875 |
|
| 7874 |
|
| 7846 Starter Cover |
|
| 7847 Starter Cover |
|
| Starter Cover on Bike |
|
| 8635 Upper Fork Slider Covers |
|
| 8630 Lower Leg Accents |
|
| 8631 Lower Leg Accents |
|
| 8630 shown on bike |
|
| 7768 Lower Leg Deflector Shields |
|
| 7768 Lower Leg Deflector Shields |
|
| 7209 Gloss Black Lower Leg Deflector Shields |
|
| 7209 Gloss Black Lower Leg Deflector Shields |
|
| 37871 Large and 3782 Small, Guage Bezels |
|
| 3781 and 3782 on Bike |
|
| Bezels shown w/Selectable Inserts |
|
| ST-604 Front Speaker Trim |
|
| ST-604 Installed |
|
| ST-584 Rear Speaker Trim |
|
| FB-IB |
|
| 8666 tour-pak light bar trim shown w/LLT-650 |
|
| 8666 tour-pak light bar trim kit |
|
| 2025 Neutral Switch Cover |
|
| 2025 Neutral Switch Cover |
|
| 3156 Turn Signal Bar Filler Panel |
|
| 7746 Speedo and Tack Brow |
|
| 7746 Speedo and Tack Brow |
|
| 1291 Front Caliper Cover |
|
| 1291 Front Caliper Cover |
|
| 1293 Rear Caliper Cover |
|
|
|
|
|
|
|
|
