These Mounts and Pegs with Quick Clamps offer an incredible range of adjustability.
The entire assembly may be moved up or down the engine guard. The arm and footpeg may be further adjusted along a vertical
or horizontal arc. A unique clevis permits angle adjustment of the footpeg.
The 45XX series with heavy duty Quick Clamp and sturdy offset arm insures that the footpegs will
clear fairing lowers and will stay where you put them and are recommended for H-D Electra Glide touring model.
These Cruise Mounts with positive locking Quick Clamps offer an incredible range of adjustability.
The entire assembly may be moved up or down on the engine guard. The arm and footpeg may be further adjusted along a vertical
or horizontal arc. A unique clevis permits angle adjustment of the footpeg. The heavy duty Quick Clamp and sturdy offset arm
ensures that the footpegs will clear fairing lowers and will stay where you put them! The 45XX Series Cruise
Mounts are available by themselves, permitting the use of any H-D style male mount peg, or with a variety of footrests.
Recommended for H-D Touring Models, FLSTC, or any Model using 1-1/4" engine guards.
The 7986 Longhorn Offset Peg Mounts with 1-1/4" Clamps are a great pair of mounts for the Electra Glide
Classic or Standard, Road Kings and the Road Glides, bikes without fairing lowers. The stylish new peg mount provides
360 degrees adjustability so it can be used to position the peg closer to the rider or further away. It's 3-1/4" arm
gives an incredible 6-1/2" range of adjustment. Incorporating an innovative locking device this mount is guaranteed not
to slip.
HD-005: Engine Guard Mounts
for Harley Davidsons. CNC Machined Billet Aluminum, compatible with or without lowers. These all-aluminum highway mounts are
CNC machined from aircraft-quality billet aluminum. This structural design makes the mounts strong enough that you can stand
on the mounts and they will not slip! The 6" long arms have a full 360° range of motion to accommodate any leg
length. This means 56 possible adjustments! The arms lock into the selected position with an internal locking pin. The mounts
can be used with below pegs or any other peg having up to a 3/8" mounting bolt. The set is triple chrome plated,
comes with all stainless steel hardware, and detailed mounting instructions. Pegs sold separately.
HD-PEGS-FF: Machined from billet aluminum, triple chrome plated. Flat
on top to match the bottom of your shoe, adding maximum comfort and support with a custom look. Soft neoprene rubber inlays
absorb vibration to reduce fatigue in your legs. Also has an adjusting setscrew to keep the pegs at your desired position.
Comes with 3/8" bolts and can be used with HD-005 mounts.
HD-PEGS: Our high-quality peg and board sets fit with any highway mount. They
may look a little like others... but take a closer look to see the big differences. These Pegs are made from steel and aluminum
and are supplied with stainless steel hardware - they won't slip or shift.
These Pegs are triple chrome-plated and will
work with the HD-005 mounts. They have 3/8” mounting bolts and can be used with most other brands of mounts.
Includes our unique locking setscrew system that allows you to adjust the pegs to the desired angle.
HD-24: The stock boards on your bike do the job, keeping your feet from
dragging on the ground, but have you ever noticed that they look more like the gas pedal on a dump truck rather than something
that belongs on your bike? The HD-24 Driver Boards, on the other hand, are 20% larger in surface area than the stock
boards and will give you more room to move your feet around and reduce fatigue on long trips. The soft neoprene rubber inlays
greatly reduce vibration. Their shape and angle will give your bike that highly-customized look. They are CNC machined from
solid billets of aircraft aluminum, triple chrome plated, and come with all required hardware. They also have a replaceable
drag-warning indicator on the bottom leading edge to prevent scraping the boards during hard cornering.
HD-25: This slip-on brake pedal cover is the finishing touch to match
your new billet Driver Floorboards. Also CNC machined from billet aluminum and triple chrome plated. Driver Floorboards sold
separately. (HD-24)
7901: Here is a
better Cruise Board system for H-D engine guards. Built-in heel rests and vibration isolating rubbers provide more support
and greater comfort on your rides. The clamp simply folds around the engine guard and is secured with one bolt. The interlocking
tooth adjustment securely holds the mount in any angle. Fits all 1-1/4" engine guards and works great with fairing lowers
too! Board measures 8" long and 4" wide at widest point.
7535/36:
Add the comfort of cruise pegs & keep that clean simple style with these Adjustable Cruise Peg Mounts. These little beauties
bolt directly onto your floorboards & allow full adjustability for optional foot positions. Two versions are available;
P/N 7535 fits H-D's "Traditional" shape driver floorboard & P/N 7536 fits H-D's "SweptWing" shape
floorboard found on Street Glides, Road King Customs, & many Screamin' Eagle Models. See line listings for complete application
information. Male mount pegs sold separately.
7535:
Fits: All '84-'09 Electra Glides (except '04-'05 FLHTCSE & '06-'09 FLHTCUSE), '84-'96 Tour Glides, '98-'09 Road Glides
(except '09 FLTRSE), '94-'09 Road Kings(except '04-'07 FLHRS, '07-'08 FLHRSE) & all '86-'09 FLST Models (except '05-'09FLSTN,
'05-'06 FLSTFSE, '08-'09 FLSTSB, & '09 FLSTC) (pr).
7536:
Fits: '06-'09 Street Glide, '04-'07 FLHRS, '04-'05 FLHTCSE, '06-'09 FLHTCUSE, '07-'08 FLHRSE, '09 FLTRSE, or any H-D Model
with Swept Wing shape boards (pr).
All Highway Mounts and Pegs are
sold in pairs and are quality show chrome. Quick Clamps simply "fold" around engine guard, work with fairing
lowers and fit all Electra Glide 1-1/4" engine guards.
7905 ISO-Boards are a great looking and comfortable alternative to the lackluster original
equipment footboards. Rubber ISO-ribs run the full length of the board providing both traction and comfort. Longer than stock
length allows the rider to move their feet around whiile on long hauls. (ISO-Boards have been redesigned to accept Heel
Guards and the Cruise Arm Mark III. Cruise Arm install requires adapter kit, P/N 7917, sold separately)
7907 ISO-Passenger Boards (pr) Fits:
’93-’08 Dressers and Road Kings and all FLST models with H-D accessory footboard kits. Works well with Adjustable Passenger Foot Options.
7902
ISO Rider & Passenger Boards combo. Save $89.99 when you purchase Rider and Passenger ISO Boards above, in combination! Quick Clamps - Stainless
steel contruction for superior strength and hinged construction for fast simple installation. No more stripped bolt
heads common of 3-piece designs. All clamps have 1/2" hole for peg mount.
7914/7915 - This design allows easy installation by simply drilling
mounting holes in the steel footboard base for the adjustable mount and full-length reinforcing plate. The entire assembly
mounts to the footboard, so the various mounting brackets used by H-D are not a factor. The reinforcing plate adds stiffness
to the footboard to keep flex to a minimum. (The stock rubber footboard pads remain unaffected.)
The arms are fully
adjustable front to back and are available with or without our cushy ISO-Pegs. Cruise Arm Mark III adjustment is limited when
installed on motorcycles with engine guards.
Fits: ‘84-’08 Dresser and Road Kings without fairing lowers
(ex. '04-'08 FLHTCSE, FLHTCUSE, FLHRSE, FLHRS, FLHX)
Note: Touring models require support kit, P/N 4533! Read on!
Now for Road King and Dresser - It is now possible to install our Cruise Arm Mark III on H-D Touring models! We have
designed a support brace that quickly and easily installs underneath the frame between the footboard mounting brackets. This
brace supports the stock brackets and keeps them from flexing under the added leverage of the Cruise Arm Mark III.
4588 - Repositions driver boards out 1 inch and forward 1
inch from stock location. Makes a noticeable difference in comfort; thighs aren’t as tight against the tank, right
knee is not as tight against the air cleaner, and legs get to stretch out a little bit more. Compatible with ISO-Boards as
well as H-D Traditional or Swept Wing shaped boards. Not compatible with Cruise Arm Mark III (P/Ns 7914, 7915) or standard-length
version of Cruise Arm Mark IV (P/N 7844) Fits '97 to current.
450
- Installing this kit moves your stock driver boards outward 3/4 of an inch. It doesn’t sound like much, but it really
makes a big difference. You don’t have to hug the gas tank with your thighs to get your foot fully on the board. They
also help to alleviate some of the heat build-up by allowing the hot air to get out between your leg and the bike. All bolts
are stainless and the spacers are powder coated black for durability. Running Board Extenders are compatible with fairing
lowers. Note: Not compatible with Chrome Display Stand, H-D part number 99002-97 or '09 models.
HG450CV: Chrome and Extends rider floorboards outboard by 1 inch. All
MY '09 to current FL Screaming Eagle CVO & TriGlide Touring models. Please note that the bracket profile
is not exact. The FL Touring spacer are used but the fasteners are different. The profile difference is only noticeable when
under the bike looking up. From the top the profile is EXACT.
HG450BV:
Same as above in black.
HG450C: Same as above
but show chrome for for MY '09 to current Touring models. For stock style brackets which have been chromed.
HG450B: Same as above but black powder coat. For stock brackets..which
are black.
HG450EC: Same as above in chrome
for MY '83 to '91.
HG450EB: Same as above
in black.
7540: Adding the comfort of highway
pegs to Touring rig doesn't have to mean extra clutter. These stealthy highway pegs simply bolt in place on the bottom of
the Traditional or Swept Wing H-D footboard. When deployed, they fold out & lock into place, much like a pocket knife
blade. A release lever allows them to return to their original, almost invisible position when not in use. A hinge allows
them to fold up & back if cornering touch-down occurs. For traditional boards. Fits: ‘84 - current Electra
Glides (except ‘04-‘05 FLHTCSE & ‘06-‘10 FLHTCUSE), ‘84-‘96 Tour Glides, ‘98-’09
Road Glides (except ‘09 FLTRSE), ‘94-‘10 Road Kings (except ‘04-‘07 FLHRS, ‘07-‘08
FLHRSE), All ’09-’10 Trikes & all ‘86-‘08 FLST/FLSTC, ’90-’10 FLSTF, ‘93-’96
FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC.
7541:
Same as above for Swept Wing boards. Swept Wing Boards: Fits: ‘06-‘10 FLHX, ’10 FLTRX, ‘04-‘07
FLHRS, ‘04-‘05 FLHTCSE, ‘06-‘10 FLHTCUSE, ‘09 FLTRSE, ’10 FLHXSE, ’10 FLSTSE or
any H-D Model with Swept Wing shape boards
